Industrial Water Chiller
High-Performance Cooling Solutions for Industrial Applications
Precision Cooling for Demanding Industrial Processes
Delin industrial water chillers deliver stable, precise cooling for plastic injection molding, food and beverage processing, laser cutting, chemical and pharmaceutical reactors, and data center environments. Available from 3.5 kW to 210 kW (1–60 HP), each unit is configured for your process heat load, not a one-size-fits-all box.
Built for Reliability
Every chiller starts with industrial-grade Copeland or Hanbell compressors and a high-efficiency shell-and-tube or plate heat exchanger. The intelligent PLC controller with touch screen gives you set-point control and live diagnostics, while built-in overload, phase-sequence, and high/low-pressure protection safeguard the machine against the everyday disturbances of industrial power supplies.
- Temperature control from -5°C to +40°C, ±1°C standard (±0.5°C premium)
- Air-cooled and water-cooled condensers to match your site conditions
- R410A, R134a, or R407C refrigerant options
- IP54 control panel protection
Sized for Your Process Heat Load
Choosing the right chiller starts with the heat load, not the horsepower. Tell us your process, water flow rate, and target temperature, and we size the cooling capacity — from 3.5 kW to 210 kW (1 HP to 60 HP) — for your duty. Where floor space is tight or heat rejection indoors is a problem, water-cooled models reject heat through a cooling tower or dry cooler; where simplicity matters, air-cooled units install with minimal plumbing.
Stable Temperature, Production Quality
Processes such as injection molding, laser cutting, and food lines depend on a steady chilled-water supply. Delin chillers hold set-point within ±1°C (±0.5°C on premium models) even as the heat load fluctuates, so cycle times stay consistent and rejects stay low. The PLC controller logs operating data and raises alarms on overload, phase loss, or high/low pressure before small problems become downtime.
Cooling for Every Process
Plastic injection molding shops use chilled water to set and hold mold temperature, food and beverage lines cool product before packing, laser cutters and welders protect optics and consumables with a steady supply, and chemical and pharmaceutical reactors rely on it for process control. Each duty needs a different machine: a compact 3.5 kW air-cooled unit beside a single molding press, or a 210 kW water-cooled plant feeding an entire production floor. Because Delin builds the full range — from 1 HP to 60 HP — we can size one machine or several to match your heat load, instead of bending your process to a standard model.
Built to Match Your Site
Voltage, frequency, and refrigerant are configured for your destination: 50 Hz or 60 Hz supply, R410A, R134a, or R407C, and either air-cooled or water-cooled condensation. Every unit is run-tested in our Foshan factory, CE and ISO 9001 certified, with SGS third-party inspection available on request. Send us your cooling load and target temperature, and we will recommend and size the right chiller for your process.
Verified Before Shipping
Each unit is run-tested and pressure-leaked in our Foshan factory before dispatch. The full range is CE and ISO 9001 certified, with SGS third-party inspection available on request.
Why Buy Direct from Delin
As the manufacturer, we control cost and quality end to end — factory-direct pricing, customization of temperature ranges, voltages, and condenser types, and responsive support from the engineers who build the machines. Send us your cooling load and target temperature, and we will recommend and size the right chiller for you.